久久ra热在线精品视频,小蓝菓经典视频集,亚洲gv网址在线,满了...太慢了..,一女被三黑人糟蹋,真人插b免费视频播放,国产乱码一二三区四区,亚洲伊人久久大香线蕉啊 ,久久久久青草线蕉亚洲,9.1短视频蘑菇,精品国偷自产在线电影

Italy SITI reducer, MI series turbo reducer

Overview of worm gear reducer

The body shape is designed by computer, and the torque of worm gear and the life of bearing are calculated by the most modern and precise technical program. The quality of the product is due to the adoption of techniques specifically for conformance to performance parameters and close inspection of product fabrication, processing, and finished products.

Worm gear

The overall shape of the worm is bronze "ZI". The shape of the reducer continues and the vibration amplitude is improved, and the torque transmission can be mild and gradual. The running state of the reducer is silent and without vibration.

Chassis

Reducer case is produced by modern die casting technology. The material is aluminum. The perfect smoothness of the chassis eliminates the possibility of painting the chassis because we do not paint the chassis. A combination of good appearance and good performance. The die casting case is equipped with a reinforcement frame, but does not change the weight of the fuselage, and ensures the strength, hardness, surface and heat dissipation of the case.

Bearing

Starting at No. 75, the tapered scroll shaft is used as the input shaft, which makes it easier to adjust the backslash. By this way, the radial load and axial load of the input shaft are obviously improved. The speed reducer should not be adjusted when it is running without noise and vibration, and the demand for maintenance will be greatly reduced. The conical scroll shaft can also be used as an output shaft, as required.

Lubricating oil

All worm reducers in the I-MI series use a lifetime lubricant designated by SITI, which replaces synthetic lubricants with synthetic oils. The use of synthetic oils can lead to better efficiency under limited conditions.

Reversibility

The reversible and irreversible transformations of the worm reducer can be used as a function of the optional structural parameters. Sometimes some special use requires its reversibility, while others require irreversibility. In order to solve the detailed and clear customer requirements, we suggest you contact the SITI engineering department.

running state

All the running conditions of this product are silent and free of vibration. Compared to other worm gear reducer, it is an efficient product and suitable for heavy workload.

Optional

Built in torque limiter

The customer can adjust the drive torque of the reducer by adjusting the nut on the torque limiter.

Double headed worm

All I-MI series reducers can be equipped with double headed worm.

Primary deceleration body

All worm gear reducers can be fitted with a forward deceleration device in the input position.

The front speed reduction device is divided into two forms:

P 63, 71, 80, 90

P 110

SITI pre reduction device until 90 is used with B14 aluminum body, flange to minimize body size. The advantage of this structural design is that it can be supplied as an individual piece and fitted to the input flange.

The P 110 is made of G 25 cast iron and can be connected between the reducer and the B5 flange.

performance parameter

Input power 0,09kW ~ 54,91 kW

Output torque 2 ~ 4400 Nm

Deceleration ratio 7.5/1 ~ 100/1; 75/1 ~ 400/1; 400/1 ~ 4000/1